"How To" by our Pilot Staff
-
Lawndart
- Virtual Thunderbird
- Posts: 9290
- Joined: Tue Mar 29, 2005 8:36 am
- Location: Mooresville, NC
Post
by Lawndart » Mon Apr 14, 2008 5:57 pm
Normal Diamond Sight Picture
Spacing: Missile rails aligned.
- Step 1: Align the front tip of the Leader's missile rail at the back edge of his canopy for proper fore/aft and vertical stack (this is your primary sight reference line).
- Step 2: While continuing to hold "the line" (described in Step 1), adjust the lateral spacing until the long rivet/fastner row on the vertical tail is aligned with the trailing edge of the Leader's wing (this is your secondary reference used for spacing).
Note: Remember not to judge spacing by the apparent size of the reference aircraft. Always use the alignment instructions for each sight picture (textural description) regardless of monitor size, resolution, padlock / TrackIR / VR or zoom settings.
![Image](http://www.virtualthunderbirds.com/Images2/normaldiamondslot.jpg)
Last edited by
Lawndart on Sun Jul 19, 2009 9:26 pm, edited 5 times in total.