Single ship takeoff question...

Discussions about the U.S. Air Force Air Demonstration Squadron
Post Reply
spaz
Posts: 23
Joined: Wed Jun 21, 2006 7:58 am
Location: Edmond, OK

Single ship takeoff question...

Post by spaz » Fri May 30, 2008 11:15 am

Attended the Star Spangled Salute at Tinker AFB on May 24th. Great show, and got to meet Maj. Scott Poteet. Very nice and informative guy.

My question is that during the take off sequence the diamond pilots took off single ship, then reformed behind the crowd for the initial pass, is this because it is still relatively early in the season? or have they stopped the formation takeoff?

Thanks for the help!

Spaz
User avatar
Burner
Virtual Thunderbird Alumnus
Posts: 1420
Joined: Tue Mar 29, 2005 5:08 pm
Location: New Orleans, LA

Post by Burner » Fri May 30, 2008 1:14 pm

More than likely wind speed or runway length was outside minimums for a formation takeoff. They're still doing fingertip formation takeoffs. :)
Image
User avatar
Lawndart
Virtual Thunderbird
Posts: 9290
Joined: Tue Mar 29, 2005 8:36 am
Location: Mooresville, NC

Post by Lawndart » Fri May 30, 2008 3:33 pm

They'll do "lightning takeoffs" (single ship) when:

The runway isn't the standard 150-foot width needed for the four ship. Or if turbulence and crosswind component are (anticipated) to be to high in addition to what Burner already mentioned.
franc01sss
Posts: 101
Joined: Mon Aug 13, 2007 7:53 pm

Post by franc01sss » Fri May 30, 2008 3:42 pm

You guys will always surprise me with your Thunderbirds knowledge!!!

hehe
Image
spaz
Posts: 23
Joined: Wed Jun 21, 2006 7:58 am
Location: Edmond, OK

Thanks

Post by spaz » Fri May 30, 2008 9:12 pm

i think the wind was the culprit. It was blowing over 25 mph that day. I'm pretty sure the runway was wide enough, (they used it the last time they were there for a formation takeoff) it was the main runway for TAFB, AWACS use it every day.

Thanks for y our info and keep up your outstanding work!!

Spaz
User avatar
Cinch
Virtual Thunderbird Alumnus
Posts: 218
Joined: Mon Apr 04, 2005 1:59 am
Location: Atlanta, GA

Post by Cinch » Fri May 30, 2008 9:45 pm

Being that I used to work on Tinker AFB back in the day in the B1B Corrosion Control Hanger. I know the Runway is wide and long enough so it has to be the wind as a factor. About this time in Oklahoma the winds are a pain.

Cinch
Image
Post Reply